CFJBG - 1506 SPEEDY DRY COATINGS
- MSDS: CFJBG
- Manufacturer: RUST OLEUM CORP
- Product Name: 1506 SPEEDY DRY COATINGS
- National Stock Number: 8010-00F053895
Product Identification
Product ID:1506 SPEEDY DRY COATINGS
MSDS Date:11/01/1985
FSC:8010
NIIN:00F053895
MSDS Number: CFJBG
Responsible Party
VERNON HILLS, IL 60061-1583
US
Emergency Phone: 312-367-7700/312-864-8200
Info Phone: 312-367-7700/312-864-8200
Cage: 08882
Contractor
Telephone: 847-367-7700
Cage: 08882
Ingredients
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *97-1*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 45-60%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
BENZIN, NAPHTHA, MINERAL SPIRITS, PETROLEUM NAPHTHA
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 0-10%
OSHA PEL 100 PPM
ACGIH TLV: 300 PPM
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, DIZZINESS, STAGGERING GAIT,
CONFUSION, UNCONSCIOUSNESS, COMA, IRRITATION
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE, RESTORE BREATHING. EYES:
FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:81F
Lower Limits:0.9
Extinguishing Media:CO2, DRY CHEMICAL/FOAM
Fire Fighting Procedures:WEAR SCBA. WATER COOL CONTAINERS TO PREVENT
PRESSURE BUILD-UP, FOG NOZZLES PREFERRED.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. ISOLATE FROM
HEAT & OTHER IGNITION SOURCES.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE AREA
& REMOVE W/INERT ABSORBENT & NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DON'T STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDING DESIGNED/PROTECTED FOR STORAGE OF NFPA CLASS
II FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. DON'T
TAKE INTERNALLY. EMPTY CONTAINERS MAY BE HAZARDOUS.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS: USE BUREAU OF MINES APPROVED
AIRLINE TYPE RESPIRATOR/HOODS.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL.
Protective Gloves:RUBBER
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:USE GLOVES TO PREVENT PROLONGED SKIN
CONTACT.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:244-287F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID
Percent Volatiles by Volume:64-71
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, ELECTRICAL EQUIPMENT,
SPARKS/OPEN FLAMES
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.